|Place of Origin:||CHINA|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||10 KGS/BAG|
|Delivery Time:||7-10 WorkDays|
|Payment Terms:||L/C, D/A, D/P, T/T|
|Supply Ability:||1000 Ton Per Month|
|Material:||Silicon Dioxide||CAS No:||7631-86-9|
|EINECS No:||231-545-4||Counter For:||OK500/UV70C|
|Application:||UV Coatings||Appearance:||White And Colloidal Powder|
clear coat flattening agent,
silicone matting powder
White Powder Silica Matting Agent Counter For UV70C Used For UV Coatings
Silica Matting Agent good matting results have been obtained in UV-curing coatings using silica gel matting agents and careful formulation. Clear advantages were seen for surface-treated silica gel products of relatively low particle size. UV-cured lacquers and thermosetting powder coatings undergo minimal or no shrinkage during film formation.
1, Lower Viscosity. It has low oil absorption, good dispersibility, and excellent matting efficiency.
2, Surface smoothness. These silicas have minimal effect on the physical properties, allowing development of smooth films with excellent hand-feel, scratch resistance and stain resistance.
3, Excellent Transparency. The refractive index of silica is comparable to most resin systems.
|Content of sio2(dry basis) %,||≥99.0||≥99.0|
|Oil absorption, g/100g , g/100g||230-270||230-270|
|Particle Size, um(Malvent,D50)||4-5||6-7|
|Loss on drying(105℃,2Hrs)||≤5.0||≤5.0|
|1, UV wood coating, UV floor coating, UV plastic coating, UV Inks.|
|2, UV curtain coating, roller coating, spraying coating.|
|3, UV-curing coatings.|
We are the leading raw material and technical solution provider to the Paint/Coating/Ink chemical Industry. We focus on Paint/Coating Market about 25 Years, with advanced technology and good experience to develop different kinds of silica matting agent used for different application, such as Wood and furniture Coating, Industrial Coating, Coil Coating, automotive coatings and plastic coatings as well as printing inks, leather coating, textile coating and decorative coatings. We will continue to invest in research and development, application technology and production capacities in emerging markets. We had set up a research and development center to study new silica products to use special application.
Contact Person: Mr. Don