(1) hard: after the treatment of concrete osmotic seal water curing agent, mohs hardness will reach 9, mohs hardness increased by 45.3%;
(2)Wear resistance: concrete osmotic seal water curing agent can solidify the concrete into a solid solid increase in hardness and compactness, after the use of the ground after curing, wear resistance will be increased to 8 times more than;
(3) dust prevention: concrete osmotic seal water curing agent and concrete silicate chemical reaction, in the concrete surface to form a clean, dense whole, control the concrete dust from the surface of the void precipitation.
(4) anti-slip: general concrete floor, salt and alkali components will be precipitated from the surface, leading to slip.The ground, on the other hand, forms a solid, dense mass on the surface of concrete, from which the salt and alkali components do not escape.
(5)Compressive strength: the compressive strength of treated samples is 27.3% stronger than that of untreated samples, and the flexural strength is more than three times higher.
(6) anti-permeability: can effectively infiltrate into the concrete, and its chemical reaction, lock the pores inside, on the concrete surface to seal the effect, can effectively inhibit water, oil and other surface dirt into the concrete;
(7)Weathering resistance: uv and water spray have no adverse effect on the treated samples. It can effectively prevent the passage of chloride ions. Tests show that the treated ground will not be affected by exposure to electromagnetic or water mist;
(8)Corrosion resistance: after the treatment of the ground, will greatly improve the corrosion resistance of concrete.
(9), light: after the concrete seal curing agent treatment of the concrete floor will appear marble-like luster, the longer the use of the better gloss.
(10)Ring protection: concrete sealing hardener is a kind of concrete sealing, dustproof, wear-resistant hardener, colorless, odorless, non-toxic and non-combustible, can make concrete firm and dustproof;Can prevent water, oil infiltration, alkalinization, weathering and so on.
Contact Person: Mr. Don